Views: 1091

Positioner system

Product code : positioner

Positioner system used to clamp circular parts, robot hangers can be welded anywhere

Quantity:

    POSITIONER SYSTEM
    Model: Positioner
    Made in: Viet Nam


    Specification:

    Prior to the installation of the Robot Automation System, this was entirely a manual process. All welding was manual, and a crane did all part positioning.  This did not allow for proper in-position welding and created ergonomic issues for the operators.

    ROBOTEC was asked to design a robotic welding solution that is integrated into a conveyance system that automatically removes tack-welded pieces from the conveyor. The system would need to interface with the customer’s SAP system to gather needed information and automatically use parametric programming to weld specified “leak-proof” welds without operator intervention.

    Our main products: CNC CUTTING MACHINE, CNC LASER CUTTING MACHINE, AUTOMATION WELDING MACHINE, WELDING FIXTURES

     

Related Products

SHIFTER ROBOT WELDING SYSTEM

The shifter system for welding robots makes it easy for robots to travel to distant locations, increasing the operability of the welding robot.

Adiustable Welding Rotator

The rotary handle is used to weld pipe diameter 500 to 2500mm, the speed of the motor is controlled by frequency inverter with adjustable width, easy to use.

Self Aligning Turning Rolls

Self Aligning Turning Roolls is used for welding pipe diameter 500 to 3500mm, the speed of the motor is controlled by frequency inverter with adjustable width, easy to use.

Welding Rotator - 20 T

The rotary jaws select the diameter of the tube, the four wheels of the active cluster are driven by two deceleration motors, rotational speed is adjusted by inverter

Welding fixture aluminum

Aluminum plate welding using heat resistance to facilitate the welding of aluminum sheet

Positioner system

Positioner system used to clamp circular parts, robot hangers can be welded anywhere

Welding Positioner

Welding positioner is special equipment for flange and dish type workpiece, it can realize rotating at 360 and it can be used with welding manipulator and welding power

Welding turning rolls

Welding turning rolls using rotary-speed rotary chucks, adjustable from 0 to 180 degrees.

2 Position Rotator

2 Position Rotator for welding robots using rotary-speed rotary chucks, adjustable from 0 to 180 degrees.

Welding Positioner

Welding turn table are used for clamping, welding and welding of flanges for fast and accurate use

Welding Rotator

Self Aligning Turning Roll is used for welding pipe diameter 500 to 3500mm, the speed of the motor is controlled by frequency inverter with adjustable width, easy to use.

CONTACT

  • Head Office: Room 108-D5C Building, Tran Thai Tong Street, Cau Giay District, Ha Noi
  • Tel: +84.243.5528355
  • Fax: +84.243.5528356
  • Email:longdk@robotec.vn